Applied Measurements’ P9911 series submersible depth sensor is available in ranges from 0-2 to 0-100 metres water gauge and provides an industry standard 4-20mA output. The all stainless steel sensor offers great flexibility, with its two piece body design providing ease of access to the zero and span potentiometers and 5 to 1 turn down switches, allowing full field adjustability. The two halves of the unit are bolted together using six Allen screws and sealed by means of an ‘O’ ring. This, together with an IP68 sealed polythene cable outlet, completes the high integrity waterproof assembly which maintains full sealing to a depth of 100 metres. Both the sensor and electronics are protected against the effects of lightning strikes offering […]
Month: February 2001
TR200 Portable Battery-Powered Strain Gauge Digital Indicator Launched
Applied Measurements are introducing their model TR200 portable battery powered strain gauge digital indicator. This compact instrument is designed to read outputs from load cells, pressure transducers and most other strain gauge sensors with a full bridge configuration and output sensitivity between 0.75mV/V and 7.5mV/V. Bridge resistances as low as 85 ohms are compatible with the TR200. This versatile instrument which is sealed to IP65, making it ideally suited to a wide range of applications in the automotive, process control, water, aerospace and marine offshore industries where short term measurements are required. The TR200 is particularly suited to on board vehicle datalogging. All adjustments are entered via the sealed key pad to enable the user to set zero, scaling, decimal […]