Quick Enquiry


    Thanks for your enquiry. We'll be in touch soon.
    Get our latest product and application news sent directly to your inbox.
    Name: 
    Your email address:*
    Consent:*
    Please enter all required fields Click to hide
    Correct invalid entries Click to hide

    Bolt-On Weighing Systems

    BOSS-F Bolt On Load CellFitting a weighing system to an existing silo, hopper or tank using a conventional load cell system can be expensive, disruptive and sometimes even impossible.  UK sensor experts Applied Measurements Ltd offer a solution to these problems by using a simple bolt-on load transducer.

    This weighing approach is cost-effective and quick to install, causes a minimum of production downtime and is ideal as a retrofitted system. The BOSS bolt-on sensor is a well-proven robust product consisting of a strain-gauged element encased in a protective housing.  It is simply bolted to a structural member of the silo and deflects under the changing weight conditions, to give a varying electrical output relative to the load.

    Bob Davies, general manager at Applied Measurements comments “with more than 25 years experience of bolt-on sensors, we assess the suitability of this method of measurement for each individual enquiry, including an on-site survey if required. This ensures the feasibility of a successful installation at the outset and we will commit to the accuracy likely to be achievable”.  The very first consideration is the available stress for the sensor to measure and this is broadly dependent on the load applied and the design of the supporting structure it is mounted on.

    Bolt-on systems are more than adequate for the majority of vessel weighing or level monitoring systems, where accuracy in the order of 1% – 2% is acceptable.  We bolt the standard transducers to a suitable supporting member such as a leg, girder, channel or pipe.  However, in some applications custom profiled mounting blocks may be required to suit the profile of the supporting steelwork.

    For a system to be viable the load to be measured should be between 3000psi and 10,000psi.  The accuracy achieved depends on a number of factors, but most significantly the amount of available strain to be measured.

    Each BOSS sensor has an average sensitivity of 1.7mV/V for 10,000PSI.

    As a general rule, sensors mounted internally will give the best results. With external systems, there will often be a margin of error due to zero shift, which is a result of differential expansion due to solar radiation but even this can be nullified to an extent.  The accuracy achieved will be very dependent on the positioning of the sensor on the steelwork.

    Accuracy Bands

    • 3,000 – 5,000     PSI     gives +/- 2 to 3% or better
    • 5,000 – 7,500     PSI     gives +/- 1 to 2% or better
    • 7,500 – 10,000   PSI     gives +/- 1%

    Typical Application

    A 220T cement silo on a 6-leg pipe section frame, giving 6000PSI total available signal.  Our customer required the best accuracy for batching to supply ships and road tankers. As the available signal was good but not exceptional, we suggested 2x BOSS bolt-on sensors per leg to minimise errors and maximise accuracy.  The result is that the customer can batch to ships +/- 1Tonne in 100T and +/-0.5Tonne in 30T.  To minimise the effect of temperature, each Bolt-on sensor is fully insulated after installation

    Suitable instrumentation to accompany the bolt-on sensors includes mains or battery-operated digital displays, local amplifiers allowing the signals to be monitored in a control room or a telemetry system for wireless monitoring via a remote hand-held receiver or a control room PC system.

    For more information on the range of BOSS sensors please visit our bolt-on load cells page, or call us on 0118 981 7339 or email: info@appmeas.co.uk

    Subscribe to our Newsletter

    Promotions and case studies direct to your inbox!

    Posted in Load & Force, Product News

      Quick Enquiry


      Thanks for your enquiry. We'll be in touch soon.
      Get our latest product and application news sent directly to your inbox.
      Name: 
      Your email address:*
      Consent:*
      Please enter all required fields Click to hide
      Correct invalid entries Click to hide
      BSI Assurance Mark ISO 9001:2015 FS677584
      We Are a Living Wage Employer
      Cyber Essentials Certified